Are you one of those product manufacturing companies that makes use of trapezoidal thread gauge and other thread gauges as inspection tools? Do you look around for the best prices constantly for your thread gauges? If you do not want to spend a lot of money on your thread gauges, it is not enough to find the lowest prices for your thread gauges, it is also even more important to make sure that your thread gauges last long serving its fullest lifetime. Here are some very simple thread gauge maintenance tips that will help you get the maximum life out of your thread gauges.
Have you purchased your Whitworth thread gauge from the most trusted suppliers or manufacturers? You need to look for the best manufacturers so that you get the finest quality thread gauges. Only when you have good quality thread gauges, your maintenance efforts will bear results.
You should first draft a detailed usage protocol when you purchase your thread gauges. The thread gauges should not be given to everyone for use but only the designated people should make use of the thread gauges. The person in charge of using the thread gauges should be trained to use the tool correctly and should follow the maintenance protocols strictly.
You will have to mark the sizes in the thread gauge itself. It has to be engraved on the thread gauge so that you are not required to use stickers, which peel off with time. All the thread gauges should be carefully stored in their sheath. The sheath should also be marked clearly and every time the thread gauge is taken out of the sheathe it has to be immediately put back in the respective sheath once it is used.
Whenever the thread gauge needs to be moved from one location to the other, it has to be done so with great care. It should not be shifted from one place to the other without its protective sheath. This will prevent damages to the tool.
Keeping the tool clean is very crucial and you should not use the tool without cleaning it first and soon after the use, it has to be cleaned too. Whenever the thread gauge is used on a newly tapped threaded components, the metal particles, bur will settle on the grooves, and if you continue to use the tool along with these residual particles, you are likely damage the grooves and you will also damage the components that you are inspecting. You will have to therefore make it a point to keep to the strict protocol of cleaning before and after each use. This is not something that you would want to take for granted.
Avoid dropping the thread gauges by all means because when you drop, it could get damaged and the readings from these thread gauges may not be accurate. Therefore, you will have to handle the thread gauge with great care. They should be used only in their designated workstations.